2019 Doosan Portable Power Drill Modules XHP1250CMH-1800
- Year 2019
- Make Doosan Portable Power
- Model Drill Modules
- Engine Fan HP: 25
2019 Doosan Portable Power Drill Modules XHP1250CMH-1800
Doosan offers the broadest range of compressor modules in the industry. All models have proven reliable airends and sub-systems. All models are supplied with a remote oil separator tank as standard. We have got you covered with dedicated engineering support for installation and worldwide service and support.
Features may include:
- Onboard air-cooled compressor oil cooler, fan shaft driven (CM) or optional hydraulic drive (CMH)
- Pusher fan with straight through cooling flow keeps package interior temperature near ambient
- Heavy-gauge sheet metal housing
- Heavy-duty frame with integral fork lift tubes
- Dual two-stage air cleaners with safety elements
- Removable roof panel (CMH only) and side- or rear-access panels
- Mounting provisions on sides and bottom of frame
- Includes pressure regulation, separator scavenge and automatic blowdown systems, 165 PSIG min. pressure valve
- Air filters protected inside the package from rain and damage
- Roof-mounted automatic shutters protect oil cooler from environment and debris (CM only)
- Integral lifting hard points at top corners of housing
Engine
Engine
Fan HP: 25
Engine Power
Input HP Required Includes Fan: 502/512
Operational
Operating Conditions
Rated Capacity: 1250 cfm (35.4 m³/min)
Operating Speed
RPM Input: 1850/2100 | Fan RPM: 2000
Hydraulics
Hydraulic Flow
Required GPM: 19.4
Maximum Pressure
Pressure: 350 psi (24.1 bar) | Hydraulic Pressure Required: 2200
Dimensions
Dimensions
Airend Size: HR2.5 | A/E Discharge: 3 in
Length
56 in (1422.4 mm) | Separation Module: 37 in (939.8 mm)
Width
51 in (1295.4 mm) | Separation Module: 26 in (660.4 mm)
Height
43 in (1092.2 mm) | Separation Module: 60.8 in (1544.3 mm)
Capacities
Oil capacity
407 lb
Weights
Weight
Compressor Module: 3400 lb | Separation Module: 815 lb | Total (wet): 4622 lb
Dry Weight
4215 lb
Features
Features
Airend Stage: 2 | Fan Drive Method: Hydraulic | Hydraulic Connections INLET & OUTLET: -12 SAE | Case Drain Provided: -6 SAE