2024 Develon Crawler Excavators DX530LC-7
- Year 2024
- Make Develon
- Model Crawler Excavators
- Engine Model: DC13
2024 Develon Crawler Excavators DX530LC-7
Features may include:
Big Productivity and Jobsite Efficiency- Upgrade your earthmoving capabilities with the large DEVELON DX530LC-7 crawler excavator. The conventional tail swing design offers the strength and leverage needed for bigger excavating applications. Lift more weight with each cycle and complete the job faster thanks to a strong workgroup that maximizes lifting capability. Choose from standard arm or super-long reach configurations.
- The standard removable counterweight provides improved machine stability when using heavier attachments — and can be hydraulically lowered to its own trailer for easy transport to the jobsite. With an optimal swing radius, lift height and tilt position, you can lift and place loads and dig with greater productivity. The one-touch power boost momentarily increases hydraulics for even more digging power.
- A DX530LC-7 crawler excavator’s X-Chassis undercarriage offers improved strength and stability. Added material to the mainframe delivers higher performance to prolong machine durability.
- All the major pin points on the excavator boom and arm are steel castings for extra strength in tough working conditions. Heavy-duty wear plates bolt on at the end of the machine arm to maximize machine durability and reliability.
- Recessed drive motors are protected from potential damage, resulting in more uptime.
- The DX530LC-7 delivers increased torque, faster cycle times and efficient fuel consumption.
- Several systems help improve fuel efficiency. The exclusive Smart Power Control (SPC) is implemented through two systems: Variable speed control reduces the engine rpm during low workload to reduce the energy used to perform a task, and the pump torque control efficiently matches hydraulic pump torque and engine response to the task.
- The Mechatronics Design optimizes machine performance while reducing fuel consumption. Auto idle and auto shutdown features also help reduce fuel usage.
- Longer maintenance intervals and convenient service access minimize your time in the shop. For extra accessibility and servicing convenience, all filters — engine oil filter, fuel pre-filters, fuel filters and pilot filter — are located at ground level in the pump compartment.
- You can monitor your DEVELON DX530LC-7 and manage maintenance to reduce operating costs using DEVELON Fleet Management.
- Operators can monitor critical systems in real time using the DEVELON Smart Touch display that’s standard on -7 Series crawler excavators. Plus, they can access historical machine alerts right from the screen in the excavator cab.
Engine
Engine Manufacturer
Scania
Engine
Model: DC13
Cylinder Liners
6
Engine Power
Rated power, gross (hp per SAE J1995): 294 kW @ 1800 rpm | Rated power, net (hp per SAE J1349): 289 kW @ 1800 rpm
Engine Torque, Maximum
net (SAE J1995): 1863 Nm @ 900 rpm
Displacement
12.7 L
Bore
130 mm
Stroke
160 mm
Starter
24 V, 6.0 kW
Air Cleaner
Three-stage
Battery
Battery
2 x 12 V, 200 AH, 1300 CCA
Electric
Alternator
28 V, 100 amp
Operational
Operating Speed
Swing speed: 0 – 9 rpm | Travel speed [low – high]: 3.2 – 5.6 km/h
Operating Conditions
Swing torque: 20130 kgf·m | Traction force, max. (drawbar pull): 45700 Nm | Max. grade (limited by engine lub): 70% (35°)
Dimensions
Length
Boom: 7100mm | Arm: 2900 mm | Shipping: 12330 mm
Dimensions
Tail swing radius: 3800 mm | Tail swing overhang (rear): 1073 mm | Tail swing overhang (side): 1700 mm | Counterweight clearance: 1430 mm | Tumbler distance: 4475 mm | Car body clearance: 730 mm
Height
Shipping (boom): 3800 mm | Shipping (hose): 3895 mm | Cabin: 3350 mm | Cabin height above house: 845 mm | Track: 1180 mm
Width
Shipping: 3640 mm | Upper structure: without catwalks 2900 mm / with catwaks 3296 mm | Cabin: 1010 mm | Undercarriage: retracted 3640 mm / extended 4200 mm
Overall Length
Track: 5455 mm
Gauges
Track: 2970 mm
Track Width
Shoe: 900 mm
Capacities
Fuel Capacity
tank: 626 L | DEF tank: 63 L | Swing drive: 2 x5 L | Final drive (each side): 9 L
Cooling System
(radiator capacity): 52.8 L
Oil capacity
Engine oil (with filler): 45 L
Hydraulic Capacity
System: 390 L | Tank: 265 L
Cargo Capacity
Bucket type (SAE): 2.39 m3
Features
Track Type
Wide – retractable